This function will test your file for compatibility with this Solution.
Jump straight into the matching tuning tool.
Upload your file. We compare it with finished projects of your exact software version and show every matching solution. Download in seconds, checksum corrected.
Up to 8 complete files in one ECU, switched live from the driver's seat.
Open ToolUpload your file and a WinOLS CSV export. Every selected map becomes switchable.
Open ToolSoft and hard pops, overrun flames.
Open ToolSoft and hard pops and crackle for ME7.x.
Open ToolSwitchable maps for ME7.x petrol ECUs.
Open ToolSwitchable maps for 1.9 TDI EDC15.
Open ToolLaunch limiter for ME7.x.
Open ToolLaunch limiter, rolling launch and no-lift-shift.
Open ToolSwitchable maps for MED9.
Open ToolPort A2L or WinOLS CSV addresses to another firmware version.
Open ToolMultiFile Tool and CSV Mapswitch Tool in detail.
| Family | MultiFile Tool | CSV Mapswitch Tool |
|---|---|---|
| MG1 / MD1 | MG1CS008, MG1CS002, MG1CS031, MG1CP003, MG1CP007*, MG1CP046**, MG1CP777**, MG1CS047*, MG1CS163, MG1CP994*, MG1CS038 | MG1CS008, MG1CS002, MD1CP002, MG1CS031, MG1CP003, MG1CP007*, MG1CP046**, MG1CP777**, MG1CS047*, MG1CS163, MG1CP994*, MG1CS038 |
| MED17 | MED17.1.62, MED177 | MED17.5.5, MED17.1.1, MED17.1.11, MED17.1.27, MED17.1.62, MED17.3.5, MED17.5, MED17.5.21, MED17.7, MED17.7.5, MED177 |
| EDC17 | EDC17C50**, EDC17CP44** | none |
| MEVD17 | none | MEVD17.2 |
| ME17 | none | ME17.8.32*, ME17.8.33*, ME17.9.64* |
Your ECU is not listed? We may already support it and simply have not added it here yet. Just ask: Contact support
Chip & Tune by HB provides automated tools for Bosch engine control units. You upload a full read of the ECU, choose the function you need and receive the patched file a few minutes later. The patches are written directly into the ECU code, which means no external hardware, no tuning box and no additional wiring.
Available functions: multi-map switching with up to eight maps for MG1 and MED17 (Multifile Tool), map-based switching with individual maps from a WinOLS CSV (CSV Tool), classic Mapswitch for ME7, EDC15 and MEVD17, Pop and Bang for ME7, MED9 and MED17, Launch Control for ME7 and MED9, checksum correction for MG1 and EDC17, and Instant Tune, which matches your file against finished projects of the same software version and transfers their changes to your file.
All patches are locked to the vehicle identification number of the car they were generated for. Checksums of the resulting file must be corrected with your own tools before flashing unless the tool states otherwise.